sprachwahl

×
Kaltenbach

KTC 3012

PAINTING SYSTEMS

Final Painting System for Customized Steel Profiles and Steel Constructions Capacity range [mm]: 3000 x 600 and Number of Spray Guns: 12 - 24

Video

Benefits at a glance

  • Aperture size (w x h): 3.100 x 700 mm
  • Automated painting process
  • Maximum economy through reduced throughput times and paint consumption, and space saving due to reduced drying times
  • 12 paint guns (optionally 24) for complete painting in a single pass
  • Use of water-soluble or solvent-based paints
  • Low cleaning and maintenance times

Alternative Machines

KTC 3012
Topcoating with Optimum Results

Topcoating with Optimum Results

  • Complete painting in a single work step
  • Continuous processing for high throughput
Up to Three Colour Systems Allow High Flexibility

Up to Three Colour Systems Allow High Flexibility

  • 12 spray guns for painting made-to-measure steel profiles and steel constructions
  • Optionally expandable to up to 36 (three colour systems for three different colours; colour change possible without flushing the system)
  • Thickness of the paint layer continuously adjustable from 20 up to 150 µm
Automatic Topcoat Painting

Automatic Topcoat Painting

  • Painting of finished steel constructions
  • Water- or solvent-based painting possible
  • Highly economical due to low energy and paint costs
  • Maintenance and user friendly
High Throughput Due to Fast Drying Times

High Throughput Due to Fast Drying Times

  • Dryer with PU foam insulation in cartridge form
  • Adjustable temperature range
  • Optimized drying process through circulating air fans
  • The drying tunnel is connected to the preheating furnace by means of a duct system, so that the heated air can also be used in the drying process
Optimum Temperatures of Steel Beams and Constructions

Optimum Temperatures of Steel Beams and Constructions

  • Two burners
  • Extremely low gas consumption
  • Adjustable temperature range
  • The preheating furnace is connected to the after-dryer by means of a duct system, so heated air can thus be used in the drying process
ProceduresShotblasting
Workspace max.mm3.000 x 600
working range Platemm3.000
working range Profilemm3.000 x 600
Passage rangemm3.100 x 700
Degree of Automationautomatic infeed
automatic outfeed
Full-Automatic
MaterialclassSawing
ProcessProfiles
Solid Material
Plate
Welded constructions
Transport System for Painting Systems

Transport System for Painting Systems

  • For the transport of profiles, sheet metal and constructions (e.g. profiles with top and base plates up to 100 mm)
  • Provides advantages over a roller conveyor as contact with freshly-painted material is minimal
  • Multiple chain conveyors can be synchronized for the trouble-free transport of constructions

 

T 13 Transport System for Steel Construction and Steel Service Centers

T 13 Transport System for Steel Construction and Steel Service Centers

  • For material feed and removal
  • Executed in welded construction with maintenance-free, ball-bearing conveyor rollers of solid material
  • Roller-conveyor drive on the feed and removal sides with frequency-controlled gear motor
Connection to Steel Roller Conveyor

Connection to Steel Roller Conveyor

  • Hydraulic liftable and lowerable lifting beams running in both directions
  • Drive system with continuously-variable frequency-controlled gear motor
  • Each lifting line has its own hydraulic unit

 

Low-Noise Material Cross Transport

Low-Noise Material Cross Transport

By lightly raising the material using polyamide-coated rollers integrated into the roller conveyor, the traditional “steel on steel” noise from cross transporting profiles is significantly reduced. Transport technology in steel construction and steel trading will be revolutionized through this new system.

  • Fully-automatic control
  • Contributes to enhanced occupational safety and the protection of personnel and the environment

 


* Required

Let us advise you

For personal consultancy
We will help you to find the right product.

Go to inquiry form