sprachwahl

×
Kaltenbach

KKS 400 NA

CIRCULAR SAWING MACHINES

Fully-Automatic Universal Circular Saw for Materials Up to Ø 130 mm

Benefits at a glance

  • standard saw blade: Ø 400 mm
  • Mitre cuts +/- 90 Degrees
  • Automatic processing of flat, angle and solid materials, tubes and special profiles
  • Optimum swarf flow through the KALTENBACH “cut from below” principle
  • High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
  • Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
  • Minimal end-piece lengths due to special gripper design
  • Simple operation and programming via NC control
  • Space saving installation

Pictures

Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing

Alternative Machines

Automatic Zero-Point Recognition

Automatic Zero-Point Recognition

  • High level of automation of preset sawing tasks, e.g., with pre-connected magazine
Automated Sawing Process

Automated Sawing Process

  • Efficient processing of medium and large batches
  • Minimal end-piece lengths due to optimized gripper contour
  • Multiple-stroke for cutting lengths up to 9.999 mm
High Level of Automation

High Level of Automation

  • Automatic pivoting between two angles
  • Automatic, program-controlled processing of cutting sequences
High Productivity through Recallable Saw Programming

High Productivity through Recallable Saw Programming

  • Storing of programs with different sawing tasks
  • Bar/quantity-oriented mode of operation
Precise Cuts

Precise Cuts

  • Robust, powerful drive with hardened and ground helical gears
  • Smooth operation
Workpiece Clamping

Workpiece Clamping

  • 135 mm stroke
  • Large scale pressure piece for secure clamping on both sides of the saw blade
  • Hand crank for pre-adjustment
  • Flexible in material measurement, especially within wide limits
Individual Feed Adjustment

Individual Feed Adjustment

  • Universal, infinitely-variable adjustment, even during the sawing process
  • Lower feed rate with stainless steels, higher feed rate for tubes
  • Feed movement via hydraulic cylinder
Material Related Cutting Speed

Material Related Cutting Speed

  • Adaptable to the material
  • Two cutting speeds as standard
Drive performancekW1,8/2,7
Dimensions (L X W X H)mm3140 x 1950 x 1805
Weightkg1.700
ProceduresSawing
SawbladeØ mm400
Drive performancekW1,8/2,7
Cutting speedm/min13/26; 10/20; 15/30
Feedratemm/min0-1.000
Rapid advance/return movementmm/min3.300
Workspace max.mm130
Working range Squaremm120
Working range Flatmaterialmm305x20
Working range Roundmaterialmm130
Mitre range0-180°
ToolsHSS-Tools
Degree of Automationautomatic infeed
Full-Automatic
MaterialclassDrilling
Thermal cutting
Sawing
ProcessProfiles
Solid Material
Single stroke lengthmm1.000
Multiple stroke lengthmm10-9.999
Automatic Bar Infeed

Automatic Bar Infeed

  • Flat magazine for pre-storage of round and rectangular material in addition to profiles
  • High flexibility through fully-automatic infeed of a variety of materials
Automatic Bar Infeed

Automatic Bar Infeed

  • Inclined magazine for pre-storage of identical round or rectangular materials
  • High throughput through fully-automatic infeed of identical materials
  • Available in left and right-hand models
Convenient and Sturdy Standard Version for Circular Sawing Machines

Convenient and Sturdy Standard Version for Circular Sawing Machines

  • Manual adjustment via hand wheel and digital display
  • Fast and precise adjustment for accurate cuts
  • Measuring device extendable in units of 1000 or 2000 mm
  • Available in left and right-hand models
Standard Version for Circular Sawing Machines

Standard Version for Circular Sawing Machines

  • Manual adjustment of the measuring length via ruler and vernier 
  • High measuring accuracy for precise cuts
  • Measuring device extendable in units of 1000 or 2000 mm
  • Available in left and right-hand models
T3 Transport System for Circular Saws

T3 Transport System for Circular Saws

  • For material feed and removal with circular saws
  • Ball-bearing light-running rollers
  • Operating width: 330 mm / Roller diameter: 60 mm
T 4 Transport System for Circular Saws

T 4 Transport System for Circular Saws

  • For material feed and removal with circular saws
  • Solid rollers running in ball bearings, optionally available with drive
  • Operating width: 390 mm / Roller diameter: 60 mm

 


* Required

Let us advise you

For personal consultancy
We will help you to find the right product.

Go to inquiry form