Change language

×
Kaltenbach

KBS 1301 DG

BANDSAWING MACHINES

Band Saw with Mitre Unit for medium to heavy Steel Construction and Trading
Capacity Range 90° [mm]: 1300 x 700

Video

Benefits at a glance

  • Capacity Range (w x h): 1.300 × 700 mm
  • Robust, low-vibration twin-column construction for perfect cutting results
  • Excellent band life and the best cutting quality due to an inclined saw band
  • High cutting performance due to a powerful drive motor
  • Precise NC-controlled cutting-angle setting
  • Powerful clamping system reliably holds material and reduces vibrations to prolong band life and best cutting results
  • Intelligent material measurement integrated into clamping system for greater process reliability
  • Rapid/working feed concept for shorter idle times
  • Swarf brush to improve cutting performance and reduce impurities in the machine
  • Cut monitoring system incl. cutting pressure and slippage control for optimum cutting quality
  • Laser-assisted cutting edge visualisation for manual cuts
  • Drive concepts are perfectly designed for machining profiles with large material cross-sections
  • Pivotable saw mounted on guide rails for high-precision mitre cuts
  • Motor-driven, movable roller conveyor automatically removes even short mitre-cut parts

Alternative Machines

Used machines

KBS 1301 DG
'Saw Band Friendly' Operation

'Saw Band Friendly' Operation

  • Measurement in both saw band guides
  • Cutting-pressure selection and cutting-pressure display on free-standing control console
  • Self-regulating feed rate accross the range of saw band contact lengths
Self-Adjusting Profile Clamping

Self-Adjusting Profile Clamping

  • Hydraulic profile clamping within the automatic cycle control (clamping, sawing, unclamping)
  • Clamping of the workpiece immediately adjacent to the saw band for precise cuts, even with the shortest cutting lengths
  • Clamping and sawing of layers and bundles possible
Manual Material Positioning

Manual Material Positioning

  • Supply rollers attached to the left and right of the saw table
  • Manual transport and positioning movements in the sawing area
  • Front cuts and end pieces from ca. 500 mm can be moved out of the machine in manual operation
Saw Band Relief when Idling

Saw Band Relief when Idling

  • Electronically monitored, with automatic tension reduction when saw band is idle
  • Automatic shut-off of the saw drive in case of blade breakage
  • Long saw band life
Visual Display of the Cutting Edge

Visual Display of the Cutting Edge

  • Processing of material via feed creep rate through control keys directly on the saw frame
  • Sawing on tracings possible
Nearly Dry Workpiece

Nearly Dry Workpiece

  • Optimum tool lubrication when sawing profiles
  • Disposal of lubricant unnecessary
  • Long saw band life
Transport of Short Profiles

Transport of Short Profiles

  • Power-driven transport rollers in the infeed and outfeed sides immediately alongside the saw table
  • Short material lengths can also be transported through the sawing area with mitre settings
Fast and Precise Miter Adjustment

Fast and Precise Miter Adjustment

  • Adjustment on free-standing control console
  • Measurement takes place through absolute rotary encoder and frequency-controlled motor
  • Automatic, hydraulic clamping of the machine after reaching the miter setting
  • Reduced non-productive times when changing mitres
Precise, Infinitely-Variable Feed Rates

Precise, Infinitely-Variable Feed Rates

  • Strong drive power for increased cutting speed
  • Infinitely-variable saw band feed can be adjusted directly on the saw frame
  • Long saw band life even with the most varied material dimensions
Band Deflection Monitoring

Band Deflection Monitoring

  • Control of cutting path through the material when saw band begins to wear
  • Input of threshold values on the operating console in addition to cycle interruption if maximum parameters are exceeded
  • High cut quality, no material waste
Saw Band Protected from Wear

Saw Band Protected from Wear

  • Brush separately driven by three-phase motor
  • Long saw band life and excellent cut quality
Fast Marking Process

Fast Marking Process

  • Fast marking process for applying letters and numerals
  • Up to 22 characters without material movement
  • Can be integrated into fully-automated handling processes
  • Imprint still clearly visible after galvanizing or painting
Drive performancekW9,2
Dimensions (L X W X H)mm5010 x 1650 x 3105
Weightkg7.000
ProceduresSawing
Sawbandmm9.800x67x1,6
Sawband inclinationDegrees4
Drive performancekW9,2
Cutting speedm/min15-100
Feedratemm/min0-300
Rapid advance/return movementmm/min2.500
Workspace max.mm1.300 x 700
Working range min.mm50x15
Mitre range-40°/90°/+30°
ToolsBi-Metal Tools
Degree of Automationautomatic infeed
automatic outfeed
MaterialclassSawing
ProcessProfiles
Bundles
Layers
T 13 Transport System for Steel Construction and Steel Service Centers

T 13 Transport System for Steel Construction and Steel Service Centers

  • For material feed and removal
  • Executed in welded construction with maintenance-free, ball-bearing conveyor rollers of solid material
  • Roller-conveyor drive on the feed and removal sides with frequency-controlled gear motor
Cross Transport with lifting pins

Cross Transport with lifting pins

  • Hydraulic liftable and lowerable lifting pins running in both directions
  • Drive system with continuously-variable frequency-controlled gear motor
  • Each lifting pin has its own hydraulic unit
Connection to Steel Roller Conveyor

Connection to Steel Roller Conveyor

  • Hydraulic liftable and lowerable lifting beams running in both directions
  • Drive system with continuously-variable frequency-controlled gear motor
  • Each lifting line has its own hydraulic unit

 

Fast Material Cross Transport

Fast Material Cross Transport

  • Material stock in heavy-duty steel construction
  • Sliding rails of synthetic material (polyamide) for low-noise material cross transport
  • Drag chains with transport claws
  • Drive system with continuously-variable frequency-controlled gear motor

 

Standard Measuring System on the Feed Side

Standard Measuring System on the Feed Side

  • Positioning drive through servomotor with absolute rotary encoder
  • Automatic NC positioning via machine software
  • Additional pusher plates (optional) enable the handling of layers and bundles with stand-alone sawing machines

 

 

Universal Measuring System on the Feed Side

Universal Measuring System on the Feed Side

  • Positioning drive through servo motor with absolute rotary encoder
  • Automatic NC positioning via machine software
  • Additional pusher plates (optional) enable the handling of layers and bundles with stand-alone sawing machines
  • Hydraulic height adjustment for measuring various profile cross-sections

 

 

 

 

Space Saving Measuring System on the Feed Side

Space Saving Measuring System on the Feed Side

  • Positioning drive through servo motor with absolute rotary encoder
  • Automatic NC positioning via machine software
  • Additional pusher plates (optional) enable the handling of layers and bundles with stand-alone sawing machines
  • Hydraulic height adjustment for measuring various profile cross-sections
  • Automatic transposition of the measuring carriage position from the rear to the forward gripper

 

Standard Measuring System on the Feed Side for Sawing Machines

Standard Measuring System on the Feed Side for Sawing Machines

  • Positioning drive through frequency regulated three-phase motor with absolute rotary encoder
  • Automatic NC positioning via machine software
  • Rapid pivoting of the squaring arm
  • Manual adapter for processing short lengths

 

 

Universal Measuring System on the Outfeed Side for Sawing Machines

Universal Measuring System on the Outfeed Side for Sawing Machines

  • Positioning drive through servo motor with absolute rotary encoder
  • Automatic NC positioning via machine software
  • Rapid pivoting of the squaring arm
  • Automatically-extending adapter for processing short lengths
  • Material weights of more than 8 t can be processed through additional brake cylinder (optional)

 

 

Low-Noise Material Cross Transport

Low-Noise Material Cross Transport

By lightly raising the material using polyamide-coated rollers integrated into the roller conveyor, the traditional “steel on steel” noise from cross transporting profiles is significantly reduced. Transport technology in steel construction and steel trading will be revolutionized through this new system.

  • Fully-automatic control
  • Contributes to enhanced occupational safety and the protection of personnel and the environment

 

PROFICUT

Modern Software Package for KALTENBACH Sawing Machines

 

PROFICUT - Easy, user friendly machine operation

PROFICUT - Easy, user friendly machine operation

  •  Programming of orders via color touchscreen with large keypads directly on the machine control console
PROFICUT - Profile database

PROFICUT - Profile database

  • Comprehensive profile database
  • Easily expandable
  • Graphic display of workpiece forms
PROFICUT  - Production data report

PROFICUT - Production data report

  • Recording of production times of individual pieces or entire orders
PROFICUT - Data transfer and data response

PROFICUT - Data transfer and data response

  • Data input directly on the machine control console
  • Data import in DSTV or DSTV+ format
  • Data export of previously produced parts in DSTV feedback format to any directory

* Required

Let us advise you

For personal consultancy
We will help you to find the right product.

Go to inquiry form