Plate Processing Centre
Capacity range W x L [mm]: 2600 х 6000 (optional 12000)
Video
Benefits at a glance
- Diverse manufacturing technologies such as drilling, milling, countersinking, thread-cutting, contourmarking, oxyfuel and plasma cutting bundled on a single machine
- Powerful drives for optimum performance and low production times
- Higher spindle speeds ideal for milling
- 14-place tool changer for faster setup times
- Less space needed for measuring carriage
- Measuring carriage at the side runs through the machine to optimise plate fixation throughout the entire machining process
- Increased traversing speed of axes
- Durable construction provides the basis for a long-term investment
- Common cut for less waste
- Fully automatic handling of small parts
- Rotating swarf brush for automatic clearing of chips in front of cutting processes
- Two processing units for parallel machining and higher efficiency
- Optionally with downholder roll for optimum contact pressure of the plate when milling larger contours
- Less space requirements for measuring carriage by more compact design
- Higher spindle speed for drilling and milling
Alternative Machines
Used machines
Features
Convenient Operation of the System
- Plain-text display of machine data and possible error messages
- Good observation of the processes and rapid intervention in case of disturbance
Low Wear and Low Maintenance
- Drill carriage mounted on dual play-free, pre-stressed linear guides
- Robust mountig for high precision when drilling
Universal, Economical Gas Cutting Process
- Universally implementable gas cutting unit built onto the drilling unit
- Automatic height adjustment of the cutting unit
Fully Automatic Processing Possible
- Automatic disposal of small parts in a removable finished-parts container
High Cutting Speed
- Highest cutting performance and optimum cutting quality
- In addition to autogenous gas cutting, a high-performance plasma cutting machine can optionally be used
- Common cut and cross-cut technology generates significantly less waste
Dust Free Work Environment
- System with pre-separator and dust collection container
- Filtering unit with eight cartridges in flame retardant design
- Automatic filter cleaning
KF 2512: Double Throughput
- In order to increase throughput the system can be expanded through an additional drilling/gas-cutting unit (autogenous and/or plasma)
Fast Marking Process
- Fast, high-quality marking process for applying letters and numbers
- Marking depth to 1 mm regardless of material and plate thickness
- Imprint still clearly visible after galvanizing or painting
Material Marking by Means of a Milling Tool on the Drill Head
- Application of numbers and letters as well as reference boundaries for welding add-on pieces
- DSTV-Data import
- Use of high-speed carbide tools
Machine Operation with the Most Up-to-Date Software
- Easy data import and export
- Automatic or manual nesting
- Partial programming possibility via NC-DSTV, DXF or DWG files, integrated drawing program or macros
- And much more
Short Changing Times for Tools
- Automatic tool change on the drilling unit for the most common tool sizes
- Tool change unit consists of a chain change system directly attached to the portal
- Tool change automatically sets the correct speed and feed-rate values
- Automatic drill length sensing
Swarf Brush
- Fully automated swarf removal before thermal cutting
Downholder and Downholder roll
- Hold-down device minimises vibrations- thereby increasing machining quality and prolonging tool life
- Hold-down device is used with extensive milling operations
Technical Data
| Dimensions (L x W x H) | mm | 15500 x 9000 x 5000 |
| Weight | kg | approx. 13000 |
| Supply and discharge side | Drilling Thermal cutting Contour Marking Milling Threading Reducing Signing | |
| Feedrate | mm/min | 2000 |
| Drilling unit horizontal (Z- and W-axis) | Pieces | 1 / 2 |
| Drill Size | mm | 6,8 - 50 |
| Number of tools per axis | Pieces | 14 |
| Drive power axe | kW | 34,5 kW |
| Spindle speed max. | min-1 | 3500 |
| Sheet starting material sheet width | mm | 220 - 2600 |
| Sheet starting material sheet length | mm | 500 - 6000 (12000) |
| Sheet starting material sheet thickness | mm | 6 - 100 |
| Toolchanger x Magazine places | Pieces | 1 x 14 (2 x 14) |
| Tools | Carbide Tools HSS-Tools Solid Carbide Tools | |
| Degree of Automation | automatic outfeed automatic sorting of trim and remnant cuts automatic infeed Full-Automatic | |
| Material class | Steel | |
| Working processes | Plate | |
| Component length max. | mm | 60 x 60 / 2600 x 6000 (12000) |
In-/Outfeed side
Carriage
Carriage
Temporary Storage Options
Cross Transport with Lift-and-Carry System
Modern Software Package for KALTENBACH Plate Processing Machines
Easy, user friendly machine operation
- Color touchscreen with large keypads directly on the machine control console
Tool manager
- Tool Changer setup based upon the tool type and diameter
- Allocation of the drill diameter to rotational speed settings and feed rates
LANTEK - Programming via macros integrated into the drawing program
- Macros available from within the integrated drawing program and can be individually created, modified or expanded
LANTEK - Cross-cut function
- Interactive automatic or manual true-shape nesting
LANTEK - Econo-cut function
- Interactive automatic or manual true-shape nesting
LANTEK - WOS Workshop Organization System
- On-screen information on the current and open nesting orders with plate data, estimated amount of processing time, tools, etc.
- Recording of actual processing time
- Information on the production status
LANTEK - Data transfer and data response
- Data input directly on the machine’s control console
- Data import in DSTV, DXF or DWG format
- Data export of already produced parts in any directory
