×
Kaltenbach

KKS 400 NA
CIRCULAR SAWING MACHINES

Fully-automatic Universal Circular Saw for materials up to Ø 130 mm

Benefits at a glance

  • standard saw blade: Ø 400 mm
  • Mitre cuts +/- 90 Degrees
  • Automatic processing of flat, angle and solid materials, tubes and special profiles
  • Optimum swarf flow through the KALTENBACH “cut from below” principle
  • High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
  • Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
  • Minimal end-piece lengths due to special gripper design
  • Simple operation and programming via NC control
  • Space saving installation

Pictures

Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing
Circular Sawing

Alternative Machines

Used machines

Features

Precise Cuts

Precise Cuts

  • Robust, powerful drive with hardened and ground helical gears
  • Smooth operation
Workpiece Clamping

Workpiece Clamping

  • 135 mm stroke
  • Large scale pressure piece for secure clamping on both sides of the saw blade
  • Hand crank for pre-adjustment
  • Flexible in material measurement, especially within wide limits
Individual Feed Adjustment

Individual Feed Adjustment

  • Universal, infinitely-variable adjustment, even during the sawing process
  • Lower feed rate with stainless steels, higher feed rate for tubes
  • Feed movement via hydraulic cylinder
Material Related Cutting Speed

Material Related Cutting Speed

  • Adaptable to the material
  • Two cutting speeds as standard
Automated Sawing Process

Automated Sawing Process

  • Efficient processing of medium and large batches
  • Minimal end-piece lengths due to optimized gripper contour
  • Multiple-stroke for cutting lengths up to 9.999 mm
High Productivity through Recallable Saw Programming

High Productivity through Recallable Saw Programming

  • Storing of programs with different sawing tasks
  • Bar/quantity-oriented mode of operation
Automatic Zero-Point Recognition

Automatic Zero-Point Recognition

  • High level of automation of preset sawing tasks, e.g., with pre-connected magazine
High Level of Automation

High Level of Automation

  • Automatic pivoting between two angles (optional)
  • Automatic, program-controlled processing of cutting sequences

Technical Data

Drive performancekW1,8/2,7
Dimensions (L x W x H)mm3140 x 1950 x 1805
Weightkgapprox. 1.700
Supply and discharge sideSawing
SawbladeØ mm400
Cutting speedm/min13/26; 10/20; 15/30
Sawblade feedratemm/min0-1.000
Rapid advance/return movementmm/min3.300
Workspace max.mm130
Working range Squaremm120
Working range Flatmaterialmm305x20
Working range Roundmaterialmm130
Mitre range0-180°
ToolsHSS-Tools
Degree of Automationautomatic infeed
Full-Automatic
Material classStainless Steel
Non-ferrous metal
Steel
Working processesSolid Material
Profiles
Single stroke lengthmm1.000
Multiple stroke lengthmm10-9.999

In-/Outfeed side

Automatic Bar Infeed

Automatic Bar Infeed

FM 1 Flat Magazine
Automatic Bar Infeed

Automatic Bar Infeed

LM 1 Loading Magazine
L 45 E length measuring device

L 45 E length measuring device

  • for manually adjustment of measurement length
  • adjustable vernier for high measurement accuracy
  • attachable stop guide for short cut lengths
  • stop arm can be pivoted upwards
  • can be fitted with a digital display
L 45 I length measuring device

L 45 I length measuring device

  • The stop is moved using a handwheel, the clamping hydraulically using a hand valve
  • Digital display provides information about the position
T3 Transport System for Circular Saws

T3 Transport System for Circular Saws

  • For material feed and removal with circular saws
  • Ball-bearing light-running rollers
  • Operating width: 330 mm / Roller diameter: 60 mm
T 4 Transport System for Circular Saws

T 4 Transport System for Circular Saws

  • For material feed and removal with circular saws
  • Solid rollers running in ball bearings, optionally available with drive
  • Operating width: 390 mm / Roller diameter: 60 mm

 

Inquiry


* Required

Let us advise you

For personal consultancy
We will help you to find the right product.

Go to inquiry form