Band Saw with Mitre Unit for light to medium Steel Construction and Trading
Capacity Range 90° [mm]: 400 x 350
Benefits at a glance
- Capacity Range (w x h): 400 × 350 mm
- Robust, low-vibration twin-column construction for perfect cutting results
- Long blade life and the best cutting quality due to an inclined saw band
- High cutting performance due to a powerful drive motor
- Precise NC-controlled cutting-angle setting
- Powerful clamping system reliably holds material and reduces vibrations to prolong band life and best cutting results
- Rapid/working feed concept for shorter idle times
- Swarf brush to improve cutting performance and reduce impurities in the machine
- Cut monitoring system incl. cutting pressure and slippage control for optimum cutting quality
- Laser-assisted cutting edge visualisation for manual cuts
Alternative Machines

Features

Precise, Infinitely-Variable Feedrates
- Strong drive power for increased cutting speed
- Infinitely-variable saw band feed can be adjusted directly on the saw frame
- Long saw band life even with the most varied material dimensions

Fast and Precise Mitre Adjustment
- Manual mitre cut adjustment
- Hydraulic clamping through push button on the saw

Self-Adjusting Profile Clamping
- Hydraulic profile clamping within the automatic cycle control (clamping, sawing, unclamping)
- Clamping of the workpiece immediately adjacent to the saw band for precise cuts, even with the shortest cutting lengths
- Clamping and sawing of layers and bundles possible

'Saw Band Friendly' Operation
- Measurement in both saw band guides
- Cutting-pressure selection adjustable on the saw frame
- Self-regulating feed rate accross the range of saw band contact lengths

Saw Band Relief when Idling
- Electronically monitored, with automatic tension reduction when saw band is idle
- Automatic shut-off of the saw drive in case of blade breakage
- Long saw band life

Saw Band Protected from Wear
- Brush separately driven by three-phase motor
- Long saw band life and excellent cut quality

Visual Display of the Cutting Edge
- Processing of material via feed creep rate through control keys directly on the saw frame
- Sawing on tracings possible

Virtually Dry Workpiece
- Optimum tool lubrication when sawing profiles
- Can be installed in addition to flood coolant device
- Disposal of lubricant unnecessary
- Long saw band life

Fast and Precise Mitre Adjustment
- Adjustment on free-standing control console
- Measurement via absolute rotary encoder and frequency controlled motor
- Automatic, hydraulic clamping of the machine after reaching the mitre setting
- Reduced non-productive times when changing mitres

Band Deflection Monitoring
- Control of cutting path through the material when saw band begins to wear
- Input of threshold values on the operating console in addition to cycle interruption if maximum parameters are exceeded
- High cut quality, no material waste
Technical Data
Drive performance | kW | 4,0 |
Dimensions (L x W x H) | mm | 2710 x 1280 x 2220 |
Weight | kg | approx. 2.300 |
Supply and discharge side | Sawing | |
Sawband | mm | 5730 x 41 x 1,3 |
Sawband inclination | Degrees | 3 |
Cutting speed | m/min | 15-90 |
Feedrate | mm/min | 300 |
Rapid advance/return movement | mm/min | 2.500 |
Workspace max. | mm | 400 x 350 |
Working range Square | mm | 400 x 350 |
working range Profile | mm | 400 x 350 |
Working range min. | mm | 10 x 10 |
Mitre range | -45°/90°/+30° | |
Tools | Bi-Metal Tools | |
Degree of Automation | automatic outfeed automatic infeed | |
Material class | Steel | |
Working processes | Bundles Layers Profiles |
In-/Outfeed side

Connection to Steel Roller Conveyor
Cross Transport by Means of Lift-and-Carry System (As an Alternative to Drag Chains)

Standard Measuring System on the Feed Side for Sawing Machines
- Positioning drive through frequency regulated three-phase motor with absolute rotary encoder
- Automatic NC positioning via machine software
- Rapid pivoting of the squaring arm
- Manual adapter for processing short lengths

Standard Measuring System on the Feed Side
M 150 P Sliding Measuring Carriage with Pusher Plate

Low-Noise Material Cross Transport
By lightly raising the material using polyamide-coated rollers integrated into the roller conveyor, the traditional “steel on steel” noise from cross transporting profiles is significantly reduced. Transport technology in steel construction and steel trading will be revolutionized through this new system.
- Fully-automatic control
- Contributes to enhanced occupational safety and the protection of personnel and the environment

Space Saving Measuring System on the Feed Side
M 152 GG Sliding Measuring Carriage with Two Grippers

Cross Transport with lifting pins
Cross Transport with lifting pins

Fast Material Cross Transport
- Material stock in heavy-duty steel construction
- Sliding rails of synthetic material (polyamide) for low-noise material cross transport
- Drag chains with transport claws
- Drive system with continuously-variable frequency-controlled gear motor

T 13 Transport System for Steel Construction and Steel Service Centers
T 13 Modular Expandable Conveyor Roller System

Universal Measuring System on the Outfeed Side for Sawing Machines
- Positioning drive through servo motor with absolute rotary encoder
- Automatic NC positioning via machine software
- Rapid pivoting of the squaring arm
- Automatically-extending adapter for processing short lengths

Universal Measuring System on the Feed Side
M 151 G Sliding Measuring Carriage with Gripper
PROFICUT
Modern Software Package for KALTENBACH Sawing Machines

PROFICUT - Easy, user friendly machine operation
- Programming of orders via color touchscreen with large keypads directly on the machine control console
- Storage possibility for as many sawing orders as desired
- Automatic calculation of cutting speed and feed over the material group or DIN-Nr. (steel key)
- Graphical representation of the material
- Machine operation

PROFICUT - Profile database
- Comprehensive profile database
- Easily expandable
- Graphic display of workpiece forms

PROFICUT - Production data report
- Recording of production times of individual pieces or entire orders

PROFICUT - Data transfer and data response
- Data input directly on the machine control console
- Data import in DSTV or DSTV+ format
- Data export of previously produced parts in DSTV feedback format to any directory